Environmental Lab. Instruments

Digital / Microprocessor based pH Meter

Digital / Microprocessor based Conductivity – TDS Meter

Magnetic Stirrer with Hot Plate

APPLICATIONS OF HOT AIR OVEN

Double Walled Oven Universal (Lab. & Memmert Type) is elegantly designed in various applications for microbiology, cell cultivation of animals and plants, food studies; general heating, drying, sterilizing, baking, to perform: material tests, ageing of computer chips, run complex experiments with highly sensitive loads, drying or tempering electronic components, hardening plastic resin. Hot air oven stands for unparalleled precise, even and gentle temperature control.
Double Walled Oven Universal (Lab. & Memmert Type) is low cost options for heating- for various experiments in, industries, R&D labs, Pharmaceutical, Food & Beverage Industries and Institutions- in the field of Medical, Agricultural and Industrial Research.

SALIENT FEATURES & CONSTRUCTION OF HOT AIR OVEN

Outer chamber is made of Mild Steel duly powder coated (Standard Model), Inner & Outer S.S. (GMP Model). Inner chamber made of STAINLESS STEEL (304) sheet (Standard Model).
Inner chamber made of STAINLESS STEEL (304) sheet (Standard Model).
Forced convection system by Fan &motorized blowers fitted ensures good mixing, strong dispersion and maintains higher temperature uniformity inside the chamber & no cross contamination.
Thermal loss is prevented by filling mineral wool (Insulation) in space between the outer body & Inner chamber.
Door Gasket fixed on the double walled door for proper sealing.
Fitted with heavy hinges with a ball catcher, spring loaded door closing device. Door is duly insulated.
vapour circulation for over heat release.
U type air heating elements made of high quality Nichrome/Kanthal wire are placed in ribs, at bottom (Lab. Type) and top with left and right side (Memmert Type) for uniform heat distribution.
Inner chamber has ribs for placing the shelves at convenient levels. Supplied with 2 or 3 removable shelves.
Temperature is controlled by electronic digital temperature indicator cum controller from 50°C to 200°C ± 1°C (Lab. Type) &50°C to 250°C ± 1°C (Memmert Type) . fitted on the front panel for easy operations.
Note:- Laboratory Type in Hot Air Oven heating element fitted only bottom his working Temp. up to 200°C.
Memmert Type in Hot Air Oven heating element fitted three side his working Temp. up to 250°C.
Different programme functions can be designed for a wide variety of applications, and even when used
Temperature is displayed by Digital LED with Set Value and ProcessValue display at front of the oven.
Front Panel is provided with ON/OFF switch, temperature controller and indicators
Operating Voltage: 220 Volts AC (50 Hz).

TECHNICAL SPECIFICATIONS OF HOT AIR OVEN

Inner Chamber in MM (W x H x D)	355x355x355	455x455x455	455x455x605	605x605x605	605x910x605
Inches Conversion	14 x 14 x 14	18 x 18 x 18	18 x 18 x 24	24 x 24 x 24	24 x 24 x 36
Capacity (Approx.)	43 ltrs	90 ltrs	105 ltrs	215 ltrs	325 ltrs
Heating Load	1.00 KW	1.50 KW	1.50 KW	2. 50 KW	3.00 KW
No. of Shelves	2	2	2	2	3
Temperature Range	5°C above ambient to 200°C (In Lab. Type) ,Ambient 5°C above ambient to 250°C (In Memmert Type)
Temp. Controller	By Microprocessor Based PID Digital Temperature Indicator cum Controller.
Temp. Sensitivity	+1°C.
Air Circulation	By forced convection system (Optional)
Relay	Solid state electronic relay.
Auto Tuning System	System is compatible with auto tuning system

OPTIONAL FEATURES OF HOT AIR OVEN

NOTE: AIR CIRCULATION FAN OR Motorized Blower IS RECOMMENDED FOR 18”×18”×24” and above Size Model.

Hot Air Oven

Semi Micro Weighing Balance

APPLICATIONS OF COD DIGESTER APPARATUS

SALIENT FEATURES & CONSTRUCTION OF COD DIGESTER APPARATUS

Outer chamber is made of Mild Steel duly powder coated
Block made of Solid Aluminium.
Solid block type heated unit with provision for sample to be digested at a time in 38 mm dia reaction vessels with 20ml sample size at temp. 150°C ±1°C controlled
All the sample are heated at 150°C within ±1°C accuracy with almost uniformity of temperature.
COD Digester Apparatus fitted with Digital Double Display PID Controller with timer, Buzzer.
Temperature is displayed by Digital LED with Set Value and Process Value display at front of the COD Apparatus.
Designed with Glass Reactions and air condensers.
Being digested for 2 hours can analyses using calorimeter or conventional titration method.
Front Panel is provided with ON/OFF switch, temperature controller and indicators
Operating Voltage: 220 Volts AC (50 Hz).

TECHNICAL SPECIFICATIONS OF COD DIGESTER APPARATUS

Available Sizes	6Tube	9Tube	12Tube	15Tube	18Tube	21Tube	24Tube
Temp. Controller	By Microprocessor Based PID Digital Temperature Indicatorcum Controller.
Temp. Sensitivity	±1°C.
Timer	Inbuilt timer in Temp. Indicator cum controller
Relay	Solid state electronic relay.
Auto Tuning System	System is compatible with auto tuning system

OPTIONAL FEATURES OF COD DIGESTER APPARATUS

C.O.D. Digester Unit

Nephelo – Turbidity Meter

APPLICATIONS OF BOD INCUBATOR

Microprocessor controlled, solid-state heating/cooling incubator (BOD Incubator) down to earth.
BOD Incubator is specially designed for incubation of Biochemical Oxygen demand on water and sewage; can be used as environmental study and growth chamber by incorporating lighting and humidification system.
BOD Incubator is Used in various applications for microbiology, cell cultivation of animals, plants & food studies- where experiments requiring low temperature conditions. Used for microorganism or activation, good storage and desalting process of enzyme extracts and for preservation of vaccines, insulin, level extracts.

SALIENT FEATURES & CONSTRUCTION OF BOD INCUBATOR

Robust construction outer chamber is made of Mild Steel duly pretreated& finished with powder coated paint for lasting finish (Standard Model) Inner & Outer S.S. (GMP Model).
Inner chamber made of STAINLESS STEEL SHEET (304 Grade) (Standard Model).
Fitted with durable fan OR coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber.
Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement.
Door operated illumination lamp is fitted inside the chamber for easy visibility.
A full view inner plexiglass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature.
High grade PUF INSULATION between outer and inner chamber for minimal thermal losses.
Cooling is done by finned tube evaporator lie in the air circulation path by ISI marked Compressor/Condensing Units CFC free & R-134 aeco friendly refrigerant.
Heating elements are placed in the path of moving air duly insulated from the body.
Inner chamber has ribs for placing the shelves at convenient levels. Supplied with 2 or 3 removable shelves.
Control panel having all controls and circuitry are housed at the top fitted with Temperature controller cum Indicator Microprocessor based with LED display for Set Value (SV) & Process Value (PV) to select any desired temperature on the panel.
Caster wheel mounted for easy portability.
BOD Incubator is supplied with cord and plug.
Operating Voltage: 220 Volts AC (50 Hz).

TECHNICAL SPECIFICATIONS OF BOD INCUBATOR

Usable Space in CM	45 x 45 x 45	70 x 50 x 50	90 x 60 x 60	90 x 60 x 60	70 x 90 x 60
Capacity	3 cu. ft	6 cu. ft	10 cu. ft	12 cu. ft	16 cu. ft
Approx Volume (Ltr) (Approx.)	90 ltrs	175ltrs	280ltrs	340ltrs	440ltrs
No. of Shelves	2	2	2	2	2
Temperature Range	5°C above ambient to 60°C (Resolution0.1°C)
Temp. Controller	By Microprocessor Based PID Digital TemperatureIndicator and Controller.
Temp. Accuracy	±0.5°C
Display	LED Display for Set Value(SV) and Process Value(PV)
Relay	Solid state electronic relay.
Auto Tuning System	System is compatible with auto tuning system
Air Circulation	By forced convection system
Insulation	By High density PUF insulation
High Voltage Protection	Through automatic voltage stabilizer (Optional)
Electric Supply	220/230V AC, 50/60Hz

OPTIONAL FEATURES OF BOD INCUBATOR

PLC based control system
Stand by refrigeration system.
Ethernet / RS485 communication
Data logger
Data scanner complete with sensor
SMS mobile alert system
Door access security system
Safety digital temperature controller
Digital timer
Safety digital temperature controller
CFR 21 part 11 compliance software

NOTE: Other Customized Sizes Available on Customer Request.

B.O.D. INCUBATOR

Spectrophotometer

APPLICATIONS OF MUFFLE FURNACE

SALIENT FEATURES & CONSTRUCTION OF MUFFLE FURNACE

Outer casing is made of thick Mild Steel duly powder coated.
Light weight with ceramic fiber wool insulation (instead of Brick insulation).
Heating elements are made of KANTHAL "A-1" wire.
Thermal loss is prevented by ceramic fiber insulation in space between the outer body & heating chamber.
Fitted with heavy hinges & door is duly insulated.
Maximum working temperature range up to 850°C & 1050°C are fitted with wounded muffle.
Maximum Temperature is 900°C and 1100°C.
Fitted with thermocouple & silver fuse for protection of chamber.
Temperature is controlled by PID Controller with display of temperature on panel with an accuracy of ±3%.
Temperature is displayed by Digital LED with Set Value and ProcessValue display at front of the Furnace.
Front Panel is provided with ON/OFF switch, Microprocessor based PID controller and indicators.
Supplied with cord and plug.
Operating Voltage: 220 Volts AC (50 Hz).

TECHNICAL SPECIFICATIONS OF MUFFLE FURNACE

Inner Chamber in mm (W x H x D)	100 x 100 x 225
Inches Conversion	4 x 4 x 9
Rating in KW	1.7
Temperature Range	Maximum Temperature is 900°C and 1100°C
Heating	By Embedded heater run around the chamber
Temp. Controller	By Microprocessor Based PID Digital TemperatureIndicator cum Controller
Temp. Sensitivity	±5°C OR better by digital Microprocessorbased PID controller
Relay	Solid state electronic relay.
Voltage	Operating Voltage: 220 Volts AC (50 Hz)

OPTIONAL FEATURES OF MUFFLE FURNACE

NOTE: Other Customized Sizes Available on Customer Request.

Muffle Furnace

Binocular Microscope

APPLICATIONS OF VERTICAL AUTOCLAVE

SALIENT FEATURES & CONSTRUCTION OF VERTICAL AUTOCLAVE

Inner & Outer Chamber, constructed from Stainless Steel
Bucket / Basket Made of Stainless Steel
Lid made of thick machined stainless Steel Plate
SS knobs lid ensures user safety & safe locking
Lid is fitted with pressure gauge, spring loaded safety valve, double safety valve, manual exhaust valve, vacuum breaker as a safety device
Drain valve facilitates easy cleaning of the chamber
Moulded joint less silicon rubber gasket
All internal joints are argon arc welded, ground & polished to give crevice free internals
Miniature circuit breaker for mains ON/OFF plus safety of control panel Industrial grade energy efficient heaters reduce power bills drastically.
Audio alarm/ buzzer is raised at the end of the cycle on.
Voltage: 220 Volts AC (50 Hz)

TECHNICAL SPECIFICATIONS OF VERTICAL AUTOCLAVE

Inner Dimensions (Dia xHeight)	250x450mm	300x500mm	350x550mm	400x600mm	450x600mm	450x750mm	550x750mm	450x900mm
Inches Conversion	10 x 18	12 x 20	14 x 22	16 x 24	18 x 24	18 x 30	22 x 30	18 x 36
Capacity	22 ltrs	40 ltrs	52ltrs	80 ltrs	98 ltrs	120 ltrs	152 ltrs	200 ltrs
Working Load	2.0 KW	2.0 KW	3.0 KW	3.0 KW	4.0 KW	4.0 KW	6.0 KW	6.0 KW
Gasket	Made of Silicon Rubber
Working pressure	15 PSI
Sterilizing pressure	1.2 kgf / cm (15psi)at 121°c
Working Temp.	121 – 125°C
Inner Pressure Tank	Stainless Steel (SS-304)
Basket	Made of Stainless Steel
Lid Opening	Paddle lifting device
Boiler – HydraulicallyTested	Upto +40 psi
Water Draining System	Hand Operated Valve
Heating	BY ISI Marked Immersion Heaters
Steam & Vacuum Release	By Valve
Power Supply	220/230V AC, 50/60Hz

Digital / Microprocessor based pH Meter

Digital / Microprocessor based Conductivity – TDS Meter

Magnetic Stirrer with Hot Plate

APPLICATIONS OF HOT AIR OVEN

SALIENT FEATURES & CONSTRUCTION OF HOT AIR OVEN

TECHNICAL SPECIFICATIONS OF HOT AIR OVEN

OPTIONAL FEATURES OF HOT AIR OVEN

NOTE: AIR CIRCULATION FAN OR Motorized Blower IS RECOMMENDED FOR 18”×18”×24” and above Size Model.

Hot Air Oven

Semi Micro Weighing Balance

APPLICATIONS OF COD DIGESTER APPARATUS

SALIENT FEATURES & CONSTRUCTION OF COD DIGESTER APPARATUS

TECHNICAL SPECIFICATIONS OF COD DIGESTER APPARATUS

OPTIONAL FEATURES OF COD DIGESTER APPARATUS

C.O.D. Digester Unit

Nephelo – Turbidity Meter

APPLICATIONS OF BOD INCUBATOR

SALIENT FEATURES & CONSTRUCTION OF BOD INCUBATOR

TECHNICAL SPECIFICATIONS OF BOD INCUBATOR

OPTIONAL FEATURES OF BOD INCUBATOR

NOTE: Other Customized Sizes Available on Customer Request.

B.O.D. INCUBATOR

Spectrophotometer

APPLICATIONS OF MUFFLE FURNACE

SALIENT FEATURES & CONSTRUCTION OF MUFFLE FURNACE

TECHNICAL SPECIFICATIONS OF MUFFLE FURNACE

OPTIONAL FEATURES OF MUFFLE FURNACE

NOTE: Other Customized Sizes Available on Customer Request.

Muffle Furnace

Binocular Microscope

APPLICATIONS OF VERTICAL AUTOCLAVE

SALIENT FEATURES & CONSTRUCTION OF VERTICAL AUTOCLAVE

TECHNICAL SPECIFICATIONS OF VERTICAL AUTOCLAVE

OPTIONAL FEATURES OF VERTICAL AUTOCLAVE

NOTE: Other Customized Sizes Available on Customer Request.

Vertical Autoclave

Dissolved Oxygen Meter

Refractometer [Manual, Digital, Automatic]

Digital Ultrasonic Bath

Digital Fluoride Meter

Director :

Address :

Mail :

Phone :

Website: