Yatin Gandhi/Raj Gandhi
Digital / Microprocessor based pH Meter
Nephelo – Turbidity Meter
Refractometer [Manual, Digital, Automatic]
Moisture Analyzer & Infrared Moisture Balance
Karl Fischer Titrator
Polarimeter [Manual & Digital Automatic]
Digital / Microprocessor based Conductivity – TDS Meter
Spectrophotometer
Dissolved Oxygen Meter
Atomic Absorption Spectrophotometry
Photo Colorimeter
Digital Ultrasonic Bath
Sieve Shaker [Table-Top & Electromagnetic]
Research Centrifuge
Analytical Weighing Balance
Bomb Calorimeter
Flame Photo Meter
Tintometer
Auto Titrator
Flash Point Apparatus
Brookfield Viscosity Meter
Binocular Microscope
Melting & Boiling Point Apparatus
APPLICATIONS OF MUFFLE FURNACE
- Muffle Furnace is elegantly designed in various applications for R&D labs, Chemical Industries, Pharma & Foundries for making ash for chemical analysis.
- Low Cost option for heating the material on high temperature.
SALIENT FEATURES & CONSTRUCTION OF MUFFLE FURNACE
- Outer casing is made of thick Mild Steel duly powder coated.
- Light weight with ceramic fiber wool insulation (instead of Brick insulation).
- Heating elements are made of KANTHAL "A-1" wire.
- Thermal loss is prevented by ceramic fiber insulation in space between the outer body & heating chamber.
- Fitted with heavy hinges & door is duly insulated.
- Maximum working temperature range up to 850°C & 1050°C are fitted with wounded muffle.
- Maximum Temperature is 900°C and 1100°C.
- Fitted with thermocouple & silver fuse for protection of chamber.
- Temperature is controlled by PID Controller with display of temperature on panel with an accuracy of ±3%.
- Temperature is displayed by Digital LED with Set Value and ProcessValue display at front of the Furnace.
- Front Panel is provided with ON/OFF switch, Microprocessor based PID controller and indicators.
- Supplied with cord and plug.
- Operating Voltage: 220 Volts AC (50 Hz).
TECHNICAL SPECIFICATIONS OF MUFFLE FURNACE
| Inner Chamber in mm (W x H x D) | 100 x 100 x 225 |
|---|---|
| Inches Conversion | 4 x 4 x 9 |
| Rating in KW | 1.7 |
| Temperature Range | Maximum Temperature is 900°C and 1100°C |
| Heating | By Embedded heater run around the chamber |
| Temp. Controller | By Microprocessor Based PID Digital TemperatureIndicator cum Controller |
| Temp. Sensitivity | ±5°C OR better by digital Microprocessorbased PID controller |
| Relay | Solid state electronic relay. |
| Voltage | Operating Voltage: 220 Volts AC (50 Hz) |
OPTIONAL FEATURES OF MUFFLE FURNACE
- Data logger
- CFR 21 part 11 compliance software for data logger
- Safety digital temperature controller
- Timer
NOTE: Other Customized Sizes Available on Customer Request.
Muffle Furnace
Leak Test Apparatus
Laboratory Over Head Stirrer
APPLICATIONS OF HOT AIR OVEN
- Double Walled Oven Universal (Lab. & Memmert Type) is elegantly designed in various applications for microbiology, cell cultivation of animals and plants, food studies; general heating, drying, sterilizing, baking, to perform: material tests, ageing of computer chips, run complex experiments with highly sensitive loads, drying or tempering electronic components, hardening plastic resin. Hot air oven stands for unparalleled precise, even and gentle temperature control.
- Double Walled Oven Universal (Lab. & Memmert Type) is low cost options for heating- for various experiments in, industries, R&D labs, Pharmaceutical, Food & Beverage Industries and Institutions- in the field of Medical, Agricultural and Industrial Research.
SALIENT FEATURES & CONSTRUCTION OF HOT AIR OVEN
- Outer chamber is made of Mild Steel duly powder coated (Standard Model), Inner & Outer S.S. (GMP Model). Inner chamber made of STAINLESS STEEL (304) sheet (Standard Model).
- Inner chamber made of STAINLESS STEEL (304) sheet (Standard Model).
- Forced convection system by Fan &motorized blowers fitted ensures good mixing, strong dispersion and maintains higher temperature uniformity inside the chamber & no cross contamination.
- Thermal loss is prevented by filling mineral wool (Insulation) in space between the outer body & Inner chamber.
- Door Gasket fixed on the double walled door for proper sealing.
- Fitted with heavy hinges with a ball catcher, spring loaded door closing device. Door is duly insulated.
- vapour circulation for over heat release.
- U type air heating elements made of high quality Nichrome/Kanthal wire are placed in ribs, at bottom (Lab. Type) and top with left and right side (Memmert Type) for uniform heat distribution.
- Inner chamber has ribs for placing the shelves at convenient levels. Supplied with 2 or 3 removable shelves.
- Temperature is controlled by electronic digital temperature indicator cum controller from 50°C to 200°C ± 1°C (Lab. Type) &50°C to 250°C ± 1°C (Memmert Type) . fitted on the front panel for easy operations.
- Note:- Laboratory Type in Hot Air Oven heating element fitted only bottom his working Temp. up to 200°C.
- Memmert Type in Hot Air Oven heating element fitted three side his working Temp. up to 250°C.
- Different programme functions can be designed for a wide variety of applications, and even when used
- Temperature is displayed by Digital LED with Set Value and ProcessValue display at front of the oven.
- Front Panel is provided with ON/OFF switch, temperature controller and indicators
- Operating Voltage: 220 Volts AC (50 Hz).
TECHNICAL SPECIFICATIONS OF HOT AIR OVEN
| Inner Chamber in MM (W x H x D) | 355x355x355 | 455x455x455 | 455x455x605 | 605x605x605 | 605x910x605 |
|---|---|---|---|---|---|
| Inches Conversion | 14 x 14 x 14 | 18 x 18 x 18 | 18 x 18 x 24 | 24 x 24 x 24 | 24 x 24 x 36 |
| Capacity (Approx.) | 43 ltrs | 90 ltrs | 105 ltrs | 215 ltrs | 325 ltrs |
| Heating Load | 1.00 KW | 1.50 KW | 1.50 KW | 2. 50 KW | 3.00 KW |
| No. of Shelves | 2 | 2 | 2 | 2 | 3 |
| Temperature Range | 5°C above ambient to 200°C (In Lab. Type) ,Ambient 5°C above ambient to 250°C (In Memmert Type) | ||||
| Temp. Controller | By Microprocessor Based PID Digital Temperature Indicator cum Controller. | ||||
| Temp. Sensitivity | +1°C. | ||||
| Air Circulation | By forced convection system (Optional) | ||||
| Relay | Solid state electronic relay. | ||||
| Auto Tuning System | System is compatible with auto tuning system | ||||
OPTIONAL FEATURES OF HOT AIR OVEN
- Data logger
- Data scanner complete with sensor
- CFR 21 Part 11 compliance software for data logger/scanner
- Safety digital temperature controller
- Timer
NOTE: AIR CIRCULATION FAN OR Motorized Blower IS RECOMMENDED FOR 18”×18”×24” and above Size Model.
Hot Air Oven
APPLICATIONS OF HEATING PLATE
- Laboratory Heating Plate is a round shape heating plate with diameter 8"
SALIENT FEATURES & CONSTRUCTION OF HEATING PLATE
- Complete body made of P.C.R.C Sheet powder coated OR Complete Stainless Steel Body with top.
- Cast iron top of the plate OR S.S. top is 8" Diameter
- 1500 watts provided with Energy Regulator to control the Temperature up to 300°C.
- Supplied complete with cord & plug to work on Single Phase 220 / 230 volts A.C. supply.
TECHNICAL SPECIFICATIONS OF HEATING PLATE
| Sizes | 8”Dia | 9”Dia | 12”Dia | 10”× 16” | 12”× 18” | 18”× 24” |
|---|---|---|---|---|---|---|
| Shape Type | Round | Round | Round | Rectangular | Rectangular | Rectangular |
OPTIONAL FEATURES OF HEATING PLATE
- Microprocessor based double display PID temperature controller
- Three speed rotary switch for heating
Hot Plate
APPLICATIONS OF WATER BATH
- Double Walled Water Bath generally used for evaporating liquids for boiling the material.
- Double Walled Water Bath is low cost options for heating / boiling ideal tool for Laboratories, Pharmaceutical, Food & Beverage Industries and Institutions.
SALIENT FEATURES & CONSTRUCTION OF WATER BATH
- Double walled made of heavy gauge stainless steel.
- Provided with concentric rings (Removable) of 75mm hole.
- Concentric rings can be removed to accommodate containers of various sizes.
- Heating by immersion heaters.
- Temperature range ambient up to 90oC.
- Temperature is controlled by electronic digital temperature indicator cum controller from 50°C to 90°C ± 1°C
- Operating Voltage: 220 Volts AC (50 Hz)
TECHNICAL SPECIFICATIONS OF WATER BATH
| Internal dimensions (LX W XD) | 250 x 350 x100mm | 300 x 400 x100mm |
|---|---|---|
| No. of Holes | 6 | 12 |
| Holes Dia. | 75 mm | 75 mm |
| Heating Load | 1.0 KW | 2.0 KW |
| Temp. Controller | By Microprocessor Based PID Digital TemperatureIndicator cum Controller. | |
| Temp. Sensitivity | +1°C. | |
| Relay | Solid state electronic relay. | |
| Auto Tuning System | System is compatible with auto tuning system | |
Water Bath
APPLICATIONS OF BOD INCUBATOR
- Microprocessor controlled, solid-state heating/cooling incubator (BOD Incubator) down to earth.
- BOD Incubator is specially designed for incubation of Biochemical Oxygen demand on water and sewage; can be used as environmental study and growth chamber by incorporating lighting and humidification system.
- BOD Incubator is Used in various applications for microbiology, cell cultivation of animals, plants & food studies- where experiments requiring low temperature conditions. Used for microorganism or activation, good storage and desalting process of enzyme extracts and for preservation of vaccines, insulin, level extracts.
SALIENT FEATURES & CONSTRUCTION OF BOD INCUBATOR
- Robust construction outer chamber is made of Mild Steel duly pretreated& finished with powder coated paint for lasting finish (Standard Model) Inner & Outer S.S. (GMP Model).
- Inner chamber made of STAINLESS STEEL SHEET (304 Grade) (Standard Model).
- Fitted with durable fan OR coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber.
- Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement.
- Door operated illumination lamp is fitted inside the chamber for easy visibility.
- A full view inner plexiglass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature.
- High grade PUF INSULATION between outer and inner chamber for minimal thermal losses.
- Cooling is done by finned tube evaporator lie in the air circulation path by ISI marked Compressor/Condensing Units CFC free & R-134 aeco friendly refrigerant.
- Heating elements are placed in the path of moving air duly insulated from the body.
- Inner chamber has ribs for placing the shelves at convenient levels. Supplied with 2 or 3 removable shelves.
- Control panel having all controls and circuitry are housed at the top fitted with Temperature controller cum Indicator Microprocessor based with LED display for Set Value (SV) & Process Value (PV) to select any desired temperature on the panel.
- Caster wheel mounted for easy portability.
- BOD Incubator is supplied with cord and plug.
- Operating Voltage: 220 Volts AC (50 Hz).
TECHNICAL SPECIFICATIONS OF BOD INCUBATOR
| Usable Space in CM | 45 x 45 x 45 | 70 x 50 x 50 | 90 x 60 x 60 | 90 x 60 x 60 | 70 x 90 x 60 |
|---|---|---|---|---|---|
| Capacity | 3 cu. ft | 6 cu. ft | 10 cu. ft | 12 cu. ft | 16 cu. ft |
| Approx Volume (Ltr) (Approx.) | 90 ltrs | 175ltrs | 280ltrs | 340ltrs | 440ltrs |
| No. of Shelves | 2 | 2 | 2 | 2 | 2 |
| Temperature Range | 5°C above ambient to 60°C (Resolution0.1°C) | ||||
| Temp. Controller | By Microprocessor Based PID Digital TemperatureIndicator and Controller. | ||||
| Temp. Accuracy | ±0.5°C | ||||
| Display | LED Display for Set Value(SV) and Process Value(PV) | ||||
| Relay | Solid state electronic relay. | ||||
| Auto Tuning System | System is compatible with auto tuning system | ||||
| Air Circulation | By forced convection system | ||||
| Insulation | By High density PUF insulation | ||||
| High Voltage Protection | Through automatic voltage stabilizer (Optional) | ||||
| Electric Supply | 220/230V AC, 50/60Hz | ||||
OPTIONAL FEATURES OF BOD INCUBATOR
- PLC based control system
- Stand by refrigeration system.
- Ethernet / RS485 communication
- Data logger
- Data scanner complete with sensor
- SMS mobile alert system
- Door access security system
- Safety digital temperature controller
- Digital timer
- Safety digital temperature controller
- CFR 21 part 11 compliance software
NOTE: Other Customized Sizes Available on Customer Request.
