Yatin Gandhi/Raj Gandhi
Digital / Microprocessor based pH Meter
Digital / Microprocessor based Conductivity – TDS Meter
Refractometer [Manual, Digital, Automatic]
Moisture Analyzer & Infrared Moisture Balance
Auto Titrator
Potentiometric Titrator
Melting Point Apparatus
Disintegration Test Apparatus
Dissolution Test Apparatus
Friability Test Apparatus
Leak Test Apparatus
Karl Fischer Titrator
Digital Ultrasonic Bath
Bulk – Tap Density Apparatus
Research Centrifuge
Tablet Hardness Tester [Monsanto, Table-Top Digital, Portable Digital]
Analytical Weighing Balance
Spectrophotometer
Magnetic Stirrer with Hot Plate
Heating Mantle
Table Top Glass Distillation Unit
APPLICATIONS OF ULTRA VIOLET CABINET
- Ultra Violet (UV) Lamp emits Ultraviolet (UV) light which is an electromagnetic radiation with a wavelengthfrom 10 nm to 400 nm, shorter than that of visible light but longer than X-rays. There are numerous application of UV lamps includes- Disinfection to forensic analysis.
- UV cabinet supplied Ultra Violet tubes to various Government departments in India including many forensic labs and research establishments.
Ultra Violet Cabinet
Bursting Strength Tester
Binocular Microscope
Digital Vernier Calliper
APPLICATIONS OF HOT AIR OVEN
- Double Walled Oven Universal (Lab. & Memmert Type) is elegantly designed in various applications for microbiology, cell cultivation of animals and plants, food studies; general heating, drying, sterilizing, baking, to perform: material tests, ageing of computer chips, run complex experiments with highly sensitive loads, drying or tempering electronic components, hardening plastic resin. Hot air oven stands for unparalleled precise, even and gentle temperature control.
- Double Walled Oven Universal (Lab. & Memmert Type) is low cost options for heating- for various experiments in, industries, R&D labs, Pharmaceutical, Food & Beverage Industries and Institutions- in the field of Medical, Agricultural and Industrial Research.
SALIENT FEATURES & CONSTRUCTION OF HOT AIR OVEN
- Outer chamber is made of Mild Steel duly powder coated (Standard Model), Inner & Outer S.S. (GMP Model). Inner chamber made of STAINLESS STEEL (304) sheet (Standard Model).
- Inner chamber made of STAINLESS STEEL (304) sheet (Standard Model).
- Forced convection system by Fan &motorized blowers fitted ensures good mixing, strong dispersion and maintains higher temperature uniformity inside the chamber & no cross contamination.
- Thermal loss is prevented by filling mineral wool (Insulation) in space between the outer body & Inner chamber.
- Door Gasket fixed on the double walled door for proper sealing.
- Fitted with heavy hinges with a ball catcher, spring loaded door closing device. Door is duly insulated.
- vapour circulation for over heat release.
- U type air heating elements made of high quality Nichrome/Kanthal wire are placed in ribs, at bottom (Lab. Type) and top with left and right side (Memmert Type) for uniform heat distribution.
- Inner chamber has ribs for placing the shelves at convenient levels. Supplied with 2 or 3 removable shelves.
- Temperature is controlled by electronic digital temperature indicator cum controller from 50°C to 200°C ± 1°C (Lab. Type) &50°C to 250°C ± 1°C (Memmert Type) . fitted on the front panel for easy operations.
- Note:- Laboratory Type in Hot Air Oven heating element fitted only bottom his working Temp. up to 200°C.
- Memmert Type in Hot Air Oven heating element fitted three side his working Temp. up to 250°C.
- Different programme functions can be designed for a wide variety of applications, and even when used
- Temperature is displayed by Digital LED with Set Value and ProcessValue display at front of the oven.
- Front Panel is provided with ON/OFF switch, temperature controller and indicators
- Operating Voltage: 220 Volts AC (50 Hz).
TECHNICAL SPECIFICATIONS OF HOT AIR OVEN
| Inner Chamber in MM (W x H x D) | 355x355x355 | 455x455x455 | 455x455x605 | 605x605x605 | 605x910x605 |
|---|---|---|---|---|---|
| Inches Conversion | 14 x 14 x 14 | 18 x 18 x 18 | 18 x 18 x 24 | 24 x 24 x 24 | 24 x 24 x 36 |
| Capacity (Approx.) | 43 ltrs | 90 ltrs | 105 ltrs | 215 ltrs | 325 ltrs |
| Heating Load | 1.00 KW | 1.50 KW | 1.50 KW | 2. 50 KW | 3.00 KW |
| No. of Shelves | 2 | 2 | 2 | 2 | 3 |
| Temperature Range | 5°C above ambient to 200°C (In Lab. Type) ,Ambient 5°C above ambient to 250°C (In Memmert Type) | ||||
| Temp. Controller | By Microprocessor Based PID Digital Temperature Indicator cum Controller. | ||||
| Temp. Sensitivity | +1°C. | ||||
| Air Circulation | By forced convection system (Optional) | ||||
| Relay | Solid state electronic relay. | ||||
| Auto Tuning System | System is compatible with auto tuning system | ||||
OPTIONAL FEATURES OF HOT AIR OVEN
- Data logger
- Data scanner complete with sensor
- CFR 21 Part 11 compliance software for data logger/scanner
- Safety digital temperature controller
- Timer
NOTE: AIR CIRCULATION FAN OR Motorized Blower IS RECOMMENDED FOR 18”×18”×24” and above Size Model.
Hot Air Oven
APPLICATIONS OF STABILITY/HUMIDITY CHAMBER
- Stability Chamber Microprocessor controlled designed as per ICH GUIDELINES for various stability and shelf life tests on Pharma, Bulk Drugs, Drug Substances, Biomedical, Healthcare, Food Products, Biotech etc.
- These are widely used for confirmatory studies for direct comparison of drug substance under controlled environmental conditions.
SALIENT FEATURES & CONSTRUCTION OF STABILITY/HUMIDITY CHAMBER
- Double Wall Construction.
- Outer Body duly M.S. Powder Coated and Inner Chamber Made of Stainless Steel 304 (Standard Model) OR Complete Stainless Steel Body (GMP Model).
- Fitted with durable fan OR coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber.
- Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement.
- Inner chamber has SS angels for placing the shelves at convenient levels. Supplied with 2 or 3 removable shelves.
- A full view inner plexiglass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature.
- High grade PUF INSULATION between outer and inner chamber for minimal thermal losses.
- Cooling is done by finned tube evaporator lie in the air circulation path by ISI marked Compressor/Condensing Units CFC free & R-134 a eco friendly refrigerant.
- Heating is done by indirect heating system by air heaters made of stainless steel placed in the path of moving air in the chamber.
- Temperature Range. Temperature ranges of our Stability Chamber models are 20° to 60°C.
- Temperature controlled by microprocessor based PID temperature controller having LED display with an accuracy of ±1°C fitted with PT-100 sensor (Resolution 0.1°C)
- Humidity System: Humidity is generated by steam injection system consist of boiler tank, placed below the chamber fitted with boiler heater.
- Control panel having all controls and circuitry are housed at the top fitted with Temperature controller cum Indicator Microprocessor based PID Controller with LED display for Set Value (SV) & Process Value (PV) to select any desired temperature & humidity controller cum indicator provided with Volt meter on the panel to read the incoming voltage.
- Caster wheel mounted for easy portability.
- Supplied with cord and plug.
- Operating Voltage: 220 Volts AC (50 Hz).
TECHNICAL SPECIFICATIONS OF STABILITY/HUMIDITY CHAMBER
| Usable Space in mm | 455 X 455 X 455 | 845 x 500 x 400 | 870 x 570 x 560 | Â Â 610 x 610 x 915 | Â 610 x 610 x 1220 |
|---|---|---|---|---|---|
| Capacity | 3 Cu ft. | 6 Cu ft. | 10 Cu ft. | Â Â 12 Cu ft. | Â Â 16 Cu ft. |
| Approx Volume | 90 | 175 | 280 | 340 | 440 |
| No. of Shelves | 2 | 2 | 3 | 3 | 3 |
| Temperature Range | 20°C to 60°C (Resolution 0.1°C) | ||||
| Temperature Controller | By Microprocessor Based PID Digital Temperature Indicator | ||||
| Temp. Accuracy | ±1°C | ||||
| Humidity Range | 45% to 95% at cool temperature | ||||
| Humidity Accuracy | ±3 to 5%RH. | ||||
| Suitable For | 25°C & 60%RH, 30°C & 65%RH, 40°C &75%RH& Also for low humidity 25°C &40%RH, 40°C &25%RH, 30°C &35%RH |
||||
| Display | LED Display | ||||
| Relay | Solid state electronic relay with protective heat sink. | ||||
| Air Circulation | By forced convection system | ||||
| Insulation | By High density PUF insulation | ||||
| Operations | Nearly silent operation with ultra-low vibration | ||||
| High Voltage Protection | Through automatic voltage stabilizer (Optional) | ||||
| Electric Supply | 220/230V AC, 50/60Hz | ||||
OPTIONAL FEATURES OF STABILITY/HUMIDITY CHAMBER
- PLC based control system
- Stand by refrigeration system.
- Ethernet / RS485 communication
- Data logger
- Data scanner complete with sensor
- SMS mobile alert system
- Door access security system
- Safety digital temperature controller
- Digital timer
- Safety digital temperature controller
- CFR 21 part 11 compliance software
Note:- Other Customized Sizes Available on Customer Request.
Stability – Humidity Chamber
APPLICATIONS OF MUFFLE FURNACE
- Muffle Furnace is elegantly designed in various applications for R&D labs, Chemical Industries, Pharma & Foundries for making ash for chemical analysis.
- Low Cost option for heating the material on high temperature.
SALIENT FEATURES & CONSTRUCTION OF MUFFLE FURNACE
- Outer casing is made of thick Mild Steel duly powder coated.
- Light weight with ceramic fiber wool insulation (instead of Brick insulation).
- Heating elements are made of KANTHAL "A-1" wire.
- Thermal loss is prevented by ceramic fiber insulation in space between the outer body & heating chamber.
- Fitted with heavy hinges & door is duly insulated.
- Maximum working temperature range up to 850°C & 1050°C are fitted with wounded muffle.
- Maximum Temperature is 900°C and 1100°C.
- Fitted with thermocouple & silver fuse for protection of chamber.
- Temperature is controlled by PID Controller with display of temperature on panel with an accuracy of ±3%.
- Temperature is displayed by Digital LED with Set Value and ProcessValue display at front of the Furnace.
- Front Panel is provided with ON/OFF switch, Microprocessor based PID controller and indicators.
- Supplied with cord and plug.
- Operating Voltage: 220 Volts AC (50 Hz).
TECHNICAL SPECIFICATIONS OF MUFFLE FURNACE
| Inner Chamber in mm (W x H x D) | 100 x 100 x 225 |
|---|---|
| Inches Conversion | 4 x 4 x 9 |
| Rating in KW | 1.7 |
| Temperature Range | Maximum Temperature is 900°C and 1100°C |
| Heating | By Embedded heater run around the chamber |
| Temp. Controller | By Microprocessor Based PID Digital TemperatureIndicator cum Controller |
| Temp. Sensitivity | ±5°C OR better by digital Microprocessorbased PID controller |
| Relay | Solid state electronic relay. |
| Voltage | Operating Voltage: 220 Volts AC (50 Hz) |
OPTIONAL FEATURES OF MUFFLE FURNACE
- Data logger
- CFR 21 part 11 compliance software for data logger
- Safety digital temperature controller
- Timer
NOTE: Other Customized Sizes Available on Customer Request.
Muffle Furnace
Polarimeter [Manual & Digital Automatic]
Sieve Shaker [Table-Top & Electromagnetic]
APPLICATIONS OF VACUUM OVEN DOUBLE WALLED
- In Double Walled Vacuum Oven the thermal process occur in airtight chamber under desired level of vacuum and maintained temperature. It can help in the prevention of surface reactions (such as oxidation), decontaminating samples (removing lubricants for example) as well as for speeding up the out gassing process.
- Double Walled Vacuum Oven is low cost options for Moisture Determination, Out Gassing Solids, Aging Tests, Plating, Chemical Resistance Studies, Drying of Paper, Rubber, and Textiles, Desiccating, Dry Sterilization, Out Gassing Liquids, Vacuum Storage, Electronic Process Control.
- Vacuum Ovens are used for various experiments in, industries, R&D labs, Pharmaceutical, Food & Beverage Industries and Institutions- in the field of Medical, Agricultural and Industrial Research.
SALIENT FEATURES & CONSTRUCTION OF VACUUM OVEN DOUBLE WALLED
- Outer Chamber made of M.S. Powder Coated
- Inner chamber is made of STAINLESS STEEL (304 grade).
- Thermal loss is prevented by filling mineral wool (Insulation) in space between the outer body & Inner chamber.
- Provided with Door Gasket for proper sealing.
- Fitted with heavy hinges & door closing device.
- See through transparent window of toughened glass is provided at the front.
- Adjustable two air controlling valves are fitted for creation of vacuum in the chamber & release.
- Heating elements are made of high quality Nichrome/Kanthal wire are embedded around the chamber. Supplied with 1 or 2 removable shelves.
- Temperature is controlled by electronic digital temperature indicator cum controller from 50°C to 130°C ± 2°C OR 50°C to 200°C ± 2°C. fitted on the front panel for easy operations.
- Front Panel is provided with ON/OFF switch, temperature controller and indicators Supplied with cord and plug.
- Operating Voltage: 220 Volts AC (50 Hz).
TECHNICAL SPECIFICATIONS OF VACUUM OVEN DOUBLE WALLED
| Sizes in mm | 225 x 300mm | 300 x 380mm | 400 x 500mm | 200x200x300mm | 300x300x400mm | 455x455x455mm |
|---|---|---|---|---|---|---|
| Inches Conversion | 9 x 12 | 12 x 15 | 16 x 20 | 8 x 8 x 12 | 12 x 12 x 16 | 18 x 18 x 18 |
| Inner Shape | Round | Round | Round | Rectangular | Rectangular | Rectangular |
| Heating Load | 2.00 KW | 2.00 KW | 2.50 KW | 2.50 KW | 2.50 KW | 3.00 KW |
| No. of Shelves | 1 | 1 | 2 | 1 | 1 | 2 |
| Temperature Range | 50°C to 130°COR 50°C to 200°C | |||||
| Temp. Controller | By Microprocessor Based PID Digital Temperature Indicator cum Controller. | |||||
| Temp. Sensitivity | ±2°C. | |||||
| Vacuum | By Compatible Rotary oil sealed or noise free vacuum pump | |||||
| Relay | Solid state electronic relay with protective heat sink. | |||||
OPTIONAL FEATURES OF VACUUM OVEN DOUBLE WALLED
| Vacuum Pump | Rotary oil sealed or noise free vacuum pump |
|---|---|
| Timer Facility | Can be in built with Digital Electronic Timer |
| Communication Port | with interface and data cable to download data toyour PC |
| USB System | Can be in cooperated |
Vacuum Oven
APPLICATIONS OF HEATING PLATE
- Laboratory Heating Plate is a round shape heating plate with diameter 8"
SALIENT FEATURES & CONSTRUCTION OF HEATING PLATE
- Complete body made of P.C.R.C Sheet powder coated OR Complete Stainless Steel Body with top.
- Cast iron top of the plate OR S.S. top is 8" Diameter
- 1500 watts provided with Energy Regulator to control the Temperature up to 300°C.
- Supplied complete with cord & plug to work on Single Phase 220 / 230 volts A.C. supply.
TECHNICAL SPECIFICATIONS OF HEATING PLATE
| Sizes | 8”Dia | 9”Dia | 12”Dia | 10”× 16” | 12”× 18” | 18”× 24” |
|---|---|---|---|---|---|---|
| Shape Type | Round | Round | Round | Rectangular | Rectangular | Rectangular |
OPTIONAL FEATURES OF HEATING PLATE
- Microprocessor based double display PID temperature controller
- Three speed rotary switch for heating
Hot Plate
APPLICATIONS OF WATER BATH
- Double Walled Water Bath generally used for evaporating liquids for boiling the material.
- Double Walled Water Bath is low cost options for heating / boiling ideal tool for Laboratories, Pharmaceutical, Food & Beverage Industries and Institutions.
SALIENT FEATURES & CONSTRUCTION OF WATER BATH
- Double walled made of heavy gauge stainless steel.
- Provided with concentric rings (Removable) of 75mm hole.
- Concentric rings can be removed to accommodate containers of various sizes.
- Heating by immersion heaters.
- Temperature range ambient up to 90oC.
- Temperature is controlled by electronic digital temperature indicator cum controller from 50°C to 90°C ± 1°C
- Operating Voltage: 220 Volts AC (50 Hz)
TECHNICAL SPECIFICATIONS OF WATER BATH
| Internal dimensions (LX W XD) | 250 x 350 x100mm | 300 x 400 x100mm |
|---|---|---|
| No. of Holes | 6 | 12 |
| Holes Dia. | 75 mm | 75 mm |
| Heating Load | 1.0 KW | 2.0 KW |
| Temp. Controller | By Microprocessor Based PID Digital TemperatureIndicator cum Controller. | |
| Temp. Sensitivity | +1°C. | |
| Relay | Solid state electronic relay. | |
| Auto Tuning System | System is compatible with auto tuning system | |
Water Bath
Laboratory Over Head Stirrer
Flame Photo Meter
Atomic Absorption Spectrophotometry
Digital Thermo Hygrometer
Brookfield Viscosity Meter
Dissolved Oxygen Meter
Photo Colorimeter
Fluoride Meter
APPLICATIONS OF PASS BOX DYNAMIC
- Precision-engineered Dynamic Pass Box assists in transfer of materials driven through extremely controlled environment but without much personnel movement. Furthermore, this box helps in prevention of contaminants entrance either in the clean room or between various classified areas.
- Dynamic Pass Box that we deliver in the market is accessible at affordable prices without lowering our highest quality standards for which we are a known brand and stand for. Dynamic pass box is specifically designed such that the material transfers without much personnel movement.
- Controlling the entrance of particulate air contamination into the clean room and other controlled environments is supreme in case of Pass Box and also in order to keep the products and processes safe.
- Personnel movement is the most important issue which must be controlled. Dynamic Pass box and material transfer Hatches are very effective solution as they permit materials to be transferred into the clean environment without much personnel movements.
SALIENT FEATURES & CONSTRUCTION OF PASS BOX DYNAMIC
- Outer Chamber is made up of Stainless Steel.
- The inner chamber is made up of Stainless Steel (304 grade).
- Between the outer and inner body wool is stuffed for insulation and for the prevention of thermal loss
- Door Gasket is provided for proper sealing along with heavy hinges and door closing device
- Heating elements are made up of high quality Nichrome
- Kanthal wire are embedded around the chamber
- Supplied with 1 (or) 2 removable shelves
- Temperature is controlled by Electronic Digital temperature indicator and is fitted in front for easy visibility
- Temperature is displayed on digital
- Front panel beside the temperature display also includes the ON/OFF switch
- Supplied with chord and Plug
- Operating Voltage: 220 Volts AC (50 Hz)